Membrane chemicals like Minncare cold sterilant for membrane systems are available from Evoqua. MINNCARE® is considered the gold standard in water system sanitization against short and long-term bacterial problems. MINNCARE Cold Sterilant has been used in water system sanitization for over 25 years, testimony to it’s superior performance and reliability. MINNCARE is effective in sanitizing RO water treat-ment systems and is capable of providing a 6 log reduction of bacteria population at a 100X dilution (1%) within a 36 minute soak time. MINNCARE stops organism growth by oxidizing microbial cell proteins and enzyme systems. MINNCARE Cold Sterilant sanitizes without toxic aldehyde vapors. Peracetic acid is also safe for use with thin-film composite membranes. MINNCARE is biodegradable and will decompose into oxygen, water and acetic acid. It poses no threat to municipal waste treatment plants.
RoCide® DB20 is a concentrated, fast-acting, non-oxidizing liquid biocide for intermittent use that provides instant antimicrobial activity. It is based on a 20% solution of the active ingredient dibromo nitrilopropionamide (DBNPA).
RoCide® IS2 liquid is a broad spectrum, non-oxidizing biocide intended for continuous injection and specifically formulated for reverse osmosis (RO) feedwaters. It is based on a 1.5% isothiazolin mixture. This slow-acting biocide is powerful against microbiological contaminants commonly found in RO applications including bacteria, fungi and algae.
NIL-8 Residual Test Strips are easy to use and conveniently packaged 50 test strips per container. Each strip has a "reaction zone" pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual NIL-8.
NIL-8 Working Concentration Test Strips are easy to use and conveniently packaged 50 test strips per container. Each strip has a "reaction zone" pad located at one end of the strip. When stored and used properly, the test strip pad can indicate the working concentration of NIL-8.
NIL-8 is a peracetic acid-based solution intended for use in membrane-based
water treatment systems and associated distribution piping, valves, & controls.
Citric acid-based disinfecting wipes are effective without harsh chemicals. Ideal for hard, non-porous surfaces.
CHEMFLEX™ Refillable Dry Wipe System has been validated with peracetic acid solutions*, citric acid and bleach (1% and 10% concentrations). The wipe material is cellulose free and will not compromise the strength of the disinfectant like some cellulose-based (paper) products.
Once a disinfectant is added to the CHEMFLEX™ System, it remains stable for five days. The refillable, closed container provides an easy, accessible method to disinfect patient areas with less exposure to vapors and reduced risk of spills.
*Reference the defined approved uses per label of disinfectant
CHEMFLEX™ Refillable Dry Wipe System has been validated with peracetic acid solutions*, citric acid and bleach (1% and 10% concentrations). The wipe material is cellulose free and will not compromise the strength of the disinfectant like some cellulose-based (paper) products.
Once a disinfectant is added to the CHEMFLEX™ System, it remains stable for five days. The refillable, closed container provides an easy, accessible method to disinfect patient areas with less exposure to vapors and reduced risk of spills.
*Reference the defined approved uses per label of disinfectant
